Inflatable Sup Board EASYRIDE 10'6 "

EASYRIDE 10'6 "
THE TABLE ALL TO DO.

Easyride 10'6 "is the inflatable Sup par excellence.
It has been designed to satisfy every need: it floats and flows quickly on flat water, it is also easy to maneuver on the waves. The board has a wider stern which adds stability and gives optimal buoyancy.
The considerable volume of 265 lt and the thickness of 15 cm make this table extremely stiffer: therefore ideal for walks with the whole family, for fitness and for riding the waves, even the smallest ones. One of the best all-rounders in its category.
The Easyride 10'6 "is the perfect board for everyday use and in all sea conditions.

INCLUDED WITH THE TABLE
The 10'6 ”table includes a backpack with the Safe logo, a repair kit, a single-flow Bravo Sup pump with inflation up to 1 Bar, a Bravo Sup pressure gauge for pressure control, a removable central fin and two fixed ones.

TECHNICAL SPECIFICATIONS
MODEL_ EASYRIDE 10'6 "
LENGTH_ 320 cm / 10'6 "
WIDTH_ 82 cm / 32 "
THICKNESS_ 15 cm / 6 "
VOLUME_ 265 liters
WEIGHT_ 13 kg
COLOR_ Yellow, Green
RIDER WEIGHT_ Up to 140 kg
HOW TO USE_ Fitness, allrounders, small waves, for the whole family USE SPECIFICATIONS

THE KIT INCLUDED IN THE TABLES
Our KIT included in each SAFE table includes:
1. A nylon backpack with the SAFE logo, resistant and light, with a top zip closure. It is equipped with n ° 2 adjustable, wide and padded shoulder straps and n ° 1 padded abdominal belt with adjustable buckle for easy transport. The backpack also has two padded side handles that allow it to be transformed into a comfortable travel bag, inside it is large and can hold the table, the pump, the repair kit, the removable paddle and any other accessories.
2. A repair kit which includes: n ° 1 tube of special glue for PVC, n ° 3 PVC patches.
3. A patented SUP BRAVO pump for inflating the inflatable boards, with the possibility of inflating up to (1bar) pressure. The pump has a slightly elongated shape, is very robust and has an aluminum shaft; these characteristics make it suitable for inflating a board in 4/5 minutes allowing less effort. Pressure> 1 bar (14.5 psi) Dimensions: 11x22x45 cm
4. A BRAVO pressure gauge for checking the pressure of the inflatable SUP. The particular configuration allows progressive measurement by inserting the pressure gauge between the inflator and the valve. Finished with rubber for shocks.
5. A central fin in black plastic of excellent quality, which fits with the Pin Lock clip-on sliding system.

CONSTRUCTION AND TECHNICAL CHARACTERISTICS OF SUP:
All SAFE inflatable SUPs are designed and tested to offer maximum safety without neglecting the excellent performance qualities. Each model has a particular feature that makes it unique for its use, whether surfing, racing or leisure.
1. STRONG AIR: THE TECHNOLOGY OF SAFE INFLATABLE SUP
The peculiarity of the SAFE inflatable SUP is the construction.
All our boards are manufactured with high quality PVC through a patented manufacturing process which takes the name of "STRONG AIR" and which allows our product to have a particularly high load capacity and exceptional resistance to the most violent impacts.
Technical characteristics of the SUP SAFE:
- triple layer construction that gives strength, strength and shape to the table
- welded internal seams, which maintain the shape of the board unaltered, without the possibility of distortion
- special “Air Block” membrane that eliminates pressure losses
- four layers of lateral border
- anti-abrasion and non-slip EVA cover
2. DROP STITCH: THE MATERIAL OF SAFE INFLATABLE SUP
All SAFE inflatable SUPs are made and guaranteed by the patented high density Drop Stitch system: thousands of tensioning wires that cross the table giving it shape, while the air inside it creates pressure and makes it extremely rigid.
We have chosen a high density of material to create a high quality board with a more solid structure resistant to time and impact.
Four layers of material and maximum edge care:
SAFE inflatable SUPs are built by assembling 4 layers of material.
The board, made up inside of a core of a thousand threads, is covered by a second layer and then by a third layer which creates a real extremely solid external armor. Finally, the non-slip grip and fins are added. This whole process takes place paying particular attention to the edge which is covered by an additional layer because we know that this is precisely the most delicate part of the board where all the pressure converges.
Most inflatable SUPs on the market are covered with a single layer, SAFE inflatables instead have four, for this reason they are almost impossible to puncture or ruin, allowing use in complete safety.
The fins of the SAFE inflatable SUP:
Our fin system consists of a thruster set-up with short fixed side fins and a removable central interlocking fin, without the need to have any type of tool to fix it. This system allows you to have 3 rigid fins that increase the control of the board and the ability to proceed in a straight line and prevents the fins from bending during transport in the backpack as often happens in the system with fixed fins.
The thickness of the SAFE inflatable SUPs:
The thickness of our boards corresponds to the exact proportion between shape and rigidity. Building a thicker board means automatically making it more rigid, but also influencing its technical performance.
If a surfboard is too thick, handling and stability in the water will be compromised. For this reason we have designed the most rigid boards possible while maintaining an excellent level of performance:
11 cm is the thickness suitable for a surf-oriented board. Thin edges are needed for better control on the wave wall and good maneuverability.
15 cm is perfect for non-wave boards. This thickness guarantees maximum rigidity and stability, allows to carry a lot of weight, and thanks to its greater buoyancy, it reduces the friction in the water in race conditions.

DETAILS OF THE TABLES:
1. The inflation valve is located at the stern of the table.
2. the table has two prints of the SAFE logo positioned on the edges of the rale on the right and left.
3. The nylon handle for carrying the table is unique and is located in the center.
4. the table has a stainless steel ring positioned at the stern which is useful for attaching the leash. An additional stainless steel ring is located above the bow and is convenient for towing the sup by sailboats, tender type, or even for any emergency recoveries or anchors. In addition, the table is equipped with 4 stainless steel rings with elastic that act as a luggage rack.
5. the table has a central fin, which is inserted with the sliding system with a pin lock clip and two fixed rubber fins. The central fin is made of high quality black plastic material.