Hulls

The hull is the structure on which buoyancy depends. The hull can be divided into live work or hull and topsides. The hull is the part immersed in water, and, therefore, is the one most exposed to corrosive phenomena and oxidation of the metal parts, as sea water is an excellent electrolyte for triggering corrosion; for this reason it is necessary to protect the hulls with a cathodic protection provided by the zinc anodes. For best results, it is recommended to install anodes in the exact number and size specified by the boat designer. MTO Nautica, however, supports its customers by also offering them a consultancy and installation service, based on the material with which the hull is built and based on the type of use of the boat, that is, if it is stationary in port or if it has to go out. at sea.

105 Products

- 13%

Hulls

Anode ogive insert s/steel bcs d84mm zn

Anode bar d50mm zn

Pair of flaps 45x30 cm

Anode collar vetus kgf 25ster zn

Cutted coned ogive d45/50mm

Anode bar d60mm zn

Flaps crosslinked polyeyhylene 280x200 mm

Anode small plate vetus kgf 23a/50/80 zn

Cutted coned ogive d50mm

S.S twin flaps 30x23 cm

Anode ogive max power zn

S.S twin flaps 40x23 cm

Anode ogive sleipner sp30/40 zn

S.S twin flaps 55x23 cm

Anode ogive sleipner sp125 zn

Anode ogive sleipner sp30/40 al

S.S twin flaps 75x23 cm

Anode ogive sleipner sp55 zn

Twin trim flaps HS 30x45 cm

Anode collar vetus kgf 35/55 zn

Pair of flaps 55x30 cm

Anode collar vetus kgf 60/75 zn

Pair of flaps 75x30 cm

Anode ogive side power zn

Hulls

Email Newsletter