Hulls

The hull is the structure on which buoyancy depends. The hull can be divided into live work or hull and topsides. The hull is the part immersed in water, and, therefore, is the one most exposed to corrosive phenomena and oxidation of the metal parts, as sea water is an excellent electrolyte for triggering corrosion; for this reason it is necessary to protect the hulls with a cathodic protection provided by the zinc anodes. For best results, it is recommended to install anodes in the exact number and size specified by the boat designer. MTO Nautica, however, supports its customers by also offering them a consultancy and installation service, based on the material with which the hull is built and based on the type of use of the boat, that is, if it is stationary in port or if it has to go out. at sea.

105 Products

- 14%

Hulls

Anode flange d70mm zn

Zinc Type Solè Spinner

GDF Magnesium Anode Corrubia II series

Anode cone flange d78mm zn

Anode bar d16mm zn

Anode flange d90mm zn

Anode round flange thick d140 zn

Hull Plate Posillipo Series

Zinc Spinner Reggiani Nautica Int. Cylindrical

Set anode flange thick d120mm zn

Anode bar d18mm zn

Anode flange d110mm zn

Anode round flange thick d135 zn

Anode cone flange d78mm al

Hull Plate Vetus Series

Zinc Type Ferretti Spinner

Pr anodes flange d70mm+screws zn

Anode bar d20mm zn

Anode flange d125mm zn

Anode round flange thick d100mm zn

Set anode flange thick d135mm zn

Hydromarine Series hull plate

Anode bar d25mm zn

Anode flange d140mm zn

Hulls

Email Newsletter