CruzPro OP60 Oil Pressure

The OP60 displays the engine oil pressure in PSI or BAR on a digital display. It is already calibrated to work with the sensors of the most popular houses such as VDO, Teleflex, Faria, Stewart-Warner, GM and many others. The sensor type can be easily selected from the buttons on the front panel. The high or low pressure alarms can be set on the entire sensor reading scale.

When activated the meter will emit an alarm at 85 dB and the display will flash. All settings, calibrations and alarm values are saved in a non-volatile memory.

The detected data can be sent via standard NMEA 0183 at 4800 bps to a NMEA repeater such as the CruzPro RP30, RP110, MaxRP110 and MaxVu110. It is also possible to set this port as an external alarm output. The instrument absorbs only 0.018 Ampere and it is possible to select 5 levels of backlighting including "OFF".

Technical features

• Power supply voltage: 9.5 - 33 Vdc
• Absorption: 0.018 amps nominal
• Display: 3 digits, 5 levels of backlighting with external ignition
• Data displayed: Oil pressure, 0 to 75, 0 to 80, 0 to 150, 0 to 350, 0 to 400 PSI or equivalent BAR
• Input: the sensors of the most popular houses such as VDO, Teleflex, Faria, Stewart-Warner, GM
• NMEA 0183 serial output at 4800 bps
• Alarm: Integrated 85 dB, Settable as high and / or low oil pressure or as an output for external alarm
• Embedding hole: 55 mm