Baseggio Venox antifouling 0.75 2.5 15 Lt

SELF-POLISHING ANTIFOULING

Self-polishing antifouling based on copper, formulated for a constant and continuous release of antifouling agents for a period of 8 - 10 months for thicknesses of 100 - 120 dry microns.
Recommended for work boats in wood, iron or VTR with an average speed of up to 30 knots.

HOW AND WHEN TO USE VENOX SUPER

Compatibility: Suitable for wood, iron and VTR. Not suitable for aluminum
Application: brush, roller, spray
Minimum number of coats 2 coats
Minimum overpainting 2-4 hours
Launching min. 24 hours - max 30 days
Theoretical yield 6-7 m² / lt

TECHNICAL CHARACTERISTICS APPLICATION DATA
One-component type
Type of binder Modified natural resins
Color: Oxide red, Black, Navy blue
Specific weight kg / lt (± 0.05) 1,700 - 1,820 depending on the color
Dry residue (volume) ± 2 36%
Viscosity Ford ø 8 at 20 ° C ± 2 12 "
Storage (+ 10 + 30 ° C) 12 months in sealed containers
Packaging Lt 0,750 / 2,5 / 15

APPLICATION - DILUTION
Brush / Roller - Ready to use or with max. 5% Thinner 400
Spray - 5-10% Thinner 400
Touch drying 2-3 hours (20 ° C)
Coating time 12-24 hours (20 ° C)
Immission into water Min. 24 hours Max. 30 days
Application temperature Between + 10 ° C and + 40 ° C
Relative humidity less than 80%
Dry thickness recommended 50 microns per coat
Theoretical yield m2 / liter 6-7

PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
New wooden fairings. Apply directly 2 coats of VENOX antifouling respecting the recommended overpainting time.
Hulls already painted. Sand the old compatible antifouling well and apply 2 coats of VENOX respecting the recommended overcoating time.
NB: This product is also part of the Skipper's Nautical Line; for further information regarding this sector, see also i
complete painting cycles for boats in wood, iron, aluminum or fiberglass, available on request.

SAFETY PRECAUTIONS
Before starting the application of the paint products, carefully observe the risk symbols and safety standards indicated on the label of each can and on the Safety Data Sheet of each product available on request. For further information, do not hesitate to contact our Technical Office. www.aemmecolori.it
NOTE
The information shown here is provided to the best of our current knowledge, however, since the conditions of use of our products are beyond our control, this information does not constitute any type of implied warranty; in this sense, the supplier company declines as of now any liability that may be connected to an abnormal use of the products. The technical office of its headquarters is available for any clarification related to the use of our products. The dilution percentages and the drying times are to be considered only indicative, in relation to a temperature of 20 ° C and are therefore subject to variations with the variation of the temperature, in the presence of particular climatic conditions or application factors that are decisive at the time of 'application.

REQUEST YOUR QUOTE USING THE FORM BELOW OR CALL US AT 340/9808870